Standard Features

• Non-rotating stem prevents galling and scoring

• Four stem styles: Vee, Regulating, Metering, and Micro-Metering

• 17-4PH stem for longer service life. 316 wetted parts are also available by specifying option -316WP

• Glass-filled Teflon packing for temperatures to 600°F (315°C)

• Integral through holes for bracket mounting. A panel-mounting option is also available

• Wide range of options allow custom

Standard Materials of Construction

Standard materials of construction include 316 cold-worked stainless steel, 17-4PH, Ampco 45, and glass-filled Teflon. All BuTech equipment may also be produced in any machinable alloy. Some of the more common exotic materials used are:

• Hastelloy™

• Inconel™

• Titanium

• Monel 400™

* Cv values listed are for 2-way straight pattern valves. For 2-way angle valves, increase Cv value by 50%.
+ Maximum pressure rating at 72°F (22°C) of the valve only. Working pressure is determined by the pressure rating of the pipe.

Standard material of construction is 316 cold-worked stainless steel. Other materials are available on request. (Please consultFactory)

All fittings are supplied complete with appropriate gland and ferrule.

Standard o-ring material is Buna-N. Other materials available on request.
Line filters available in nominal ratings of 0.5, 2, 5, 10, 20, 40 and 100 micron.
Cup filters available in nominal ratings of 5, 10, 20, 40 and 100 micron.

Tubing is available in standard 20 to 24 foot length (6 to 7 meters); however, longer lengths are available on request.

 Nipples are stocked pre-cut coned and threaded in lengths up to 12” (305mm). Nipples also can be purchased in any custom length.

* Complete catalog number by adding suffix 316 for 316 stainless steel, or suffix 304 for 304 stainless steel.